LocostUSA.com
http://locostusa.com/forums/

RebelRouser RT
http://locostusa.com/forums/viewtopic.php?f=18&t=19462
Page 8 of 9

Author:  TomyJ [ January 27, 2019, 10:02 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3216.JPG
HPIM3216.JPG [ 862.8 KiB | Viewed 3214 times ]
Attachment:
HPIM3215.JPG
HPIM3215.JPG [ 962.24 KiB | Viewed 3214 times ]

Author:  TomyJ [ January 28, 2019, 8:43 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3219.JPG
HPIM3219.JPG [ 717.98 KiB | Viewed 3185 times ]
Upper control arm brackets, Guess what the spacers are for?

Author:  TomyJ [ February 23, 2019, 10:02 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3303.JPG
HPIM3303.JPG [ 971.54 KiB | Viewed 2856 times ]
Attachment:
HPIM3304.JPG
HPIM3304.JPG [ 1.02 MiB | Viewed 2856 times ]
Attachment:
HPIM3305.JPG
HPIM3305.JPG [ 1.03 MiB | Viewed 2856 times ]
Attachment:
HPIM3306.JPG
HPIM3306.JPG [ 1003.22 KiB | Viewed 2856 times ]
Attachment:
HPIM3307.JPG
HPIM3307.JPG [ 1.02 MiB | Viewed 2856 times ]
Moving Sucks...Now at least 2 full days of putting things away so I can find them again, The middle cab will hold my fasteners from under 10.32 to 1.5"

Author:  TomyJ [ March 5, 2019, 10:17 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3312.JPG
HPIM3312.JPG [ 1006.51 KiB | Viewed 2714 times ]
Attachment:
HPIM3313.JPG
HPIM3313.JPG [ 1.03 MiB | Viewed 2714 times ]
Boy am I getting lazy, I am still putting things away and then try to find something... Started on the RT working table, Don't know about you guys but working on the floor is out for me at my age, BUT the 30" 4x8 table top is out also to hard to lean over, So this is where I am at in the garage and still looking for a TIG welder AND, YES for the 220 electricity I know have...

Author:  Miatav8,MstrASE,A&P,F [ March 6, 2019, 9:16 am ]
Post subject:  Re: RebelRouser RT

Whenever you can't find something, just order another and it will turn up.

A mechanic roller chair is handy on smooth surfaces. Most high volume cycle shops have air lifts for the bikes.
I made waist height 2x8x1/2 counters with one shelf underneath on 2x4 framing in my shop.

Author:  TomyJ [ March 7, 2019, 8:57 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3314.JPG
HPIM3314.JPG [ 999.7 KiB | Viewed 2649 times ]
MiataMan this is the closest stool I can find, :wink:

Author:  horchoha [ March 8, 2019, 6:42 am ]
Post subject:  Re: RebelRouser RT

Man if that old wooden chair could talk I'd bet it would have some interesting stories to tell :)

Author:  TomyJ [ March 8, 2019, 9:39 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3318.JPG
HPIM3318.JPG [ 1.03 MiB | Viewed 2605 times ]
Attachment:
HPIM3319.JPG
HPIM3319.JPG [ 1.02 MiB | Viewed 2605 times ]
Attachment:
HPIM3320.JPG
HPIM3320.JPG [ 1.08 MiB | Viewed 2605 times ]
Moving to Hemet Ca. Big 2 bed House and huge garage for play time on the RT, with new work table...

Author:  waltj [ March 8, 2019, 11:14 pm ]
Post subject:  Re: RebelRouser RT

It gets cold up there, but fishing was good last time I was there.
waltj

Author:  TomyJ [ March 9, 2019, 9:36 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3323.JPG
HPIM3323.JPG [ 1022.67 KiB | Viewed 2573 times ]
Double checking all dimensions before welding...

Author:  TomyJ [ March 11, 2019, 8:25 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3328.JPG
HPIM3328.JPG [ 1.07 MiB | Viewed 2528 times ]

Author:  TomyJ [ March 12, 2019, 11:32 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3329.JPG
HPIM3329.JPG [ 1.04 MiB | Viewed 2486 times ]
Attachment:
HPIM3331.JPG
HPIM3331.JPG [ 991.99 KiB | Viewed 2486 times ]
Checking my builds after the move, the electric scooter will be changed to gas for longer rides...

Author:  TomyJ [ March 13, 2019, 10:36 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3332.JPG
HPIM3332.JPG [ 1.03 MiB | Viewed 2455 times ]
Attachment:
HPIM3333.JPG
HPIM3333.JPG [ 1.1 MiB | Viewed 2455 times ]
Playing with the handle bars and the seats...

Author:  TomyJ [ March 14, 2019, 9:05 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3334.JPG
HPIM3334.JPG [ 1.08 MiB | Viewed 2426 times ]
Other Seat, and WB 69" OAL 90" seat 16" to ground...

Author:  TomyJ [ March 18, 2019, 11:48 pm ]
Post subject:  Re: RebelRouser RT

Attachment:
HPIM3337.JPG
HPIM3337.JPG [ 1.04 MiB | Viewed 2334 times ]
I am not happy with the upper frame rails being 19" wide and the seat less? floor boards? But the engine is 16.5" wide? SOOOOO!!! I think it's time to set the engine and do a work around after the front control arm upper rails are finished, I should take a upper photo of seat and rails. Mocked up the gas tank brace and tie end for the rear engine mount and seat...

Page 8 of 9 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/