LocostUSA.com

I have a bunch of nice leather salvaged from a couch, and I want to use some over my aluminum dash panel. I might cover the tunnel as well. Any thoughts on the best adhesive to use?
thanks
Doug

_________________
book 4AGE build, Supra W58 transmission, Corolla GTS live axle

I don't have a specific answer, but do have an idea about where to look for one. Upholsterers bond leather and vinyl to all sorts of surfaces every day. You might locate a product in that world.

Cheers,

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886

I would think that any good general purpose contact adhesive would work. Found at the usual home improvement centers. Although, I've never bonded leather, I've not had problems in other applications using Wellwood (DAP) "Original Contact Cement"; most recently vinyl marine fabric to plywood on a boat.

_________________
Chuck.

“Any suspension will work if you don’t let it.” - Colin Chapman

Visit my ongoing MGB Rustoration log: over HERE

Or my Wankel powered Locost log : over HERE

And don't forget my Cushman Truckster resto Locostusa.com/forums/viewtopic.php?f=36&t=17766

Contact adhesive would be my suggestion, too. The primary issue with bonding leather is that some kinds can be a bit oily, which can prevent some adhesives from gripping. Nonetheless, contact cement is usually pretty secure stuff.

_________________
Scratch building, at continental-drift speed, a custom McSoreley-design framed, dual-Weber 45DCOE carburated, Zetec-engined, ridiculously fast money pit.

http://zetec7.webs.com/

_________________
Bill H
Winnipeg, MB, Canada

Back in my Experimental Aircraft days, I had a friend who built a Starduster biplane. Used leather (possibly vinyl) glued to thin alum. sheet for the interior. Used Contact cement. To my knowledge, never had any trouble with it.

_________________
Mike - Read my story at http://twinlakesseven.blogspot.com/

All of my interior coverings is held on with 3M headliner adhesive. If you coat both surfaces, you would be hard pressed to get it back off. Dave W

The shops that do aircraft interiors use a spray on contact cement. Just let it set up for 10 minutes before mating and make sure that you have no air pockets. Works great and lasts a long time.

Hey Doug

3M spray adheisive, Canadian Tire. Spray both sides, let it flash off, press together. Make sure you're lined up you only get once chance.
You can use card board or wax paper as a barrier to keep the 2 pieces from bonding as you line the work up. Then carefully pull the barrier back as you press the work together.

_________________
Perry

'If man built it, man can fix it'
"No one ever told me I couldn't do it."
"If you can't build it safe, don't build it."

Perry's Locost Super Che7enette Build
Perry's TBird Based 5.0L Super 7 L.S.O
Perry's S10 Super 7 The 3rd
Perry's 4th Build The Topolino 500 (Little Mouse) Altered
Perry's 5th Build the Super Slant 6 Super 7
Perry's Final Build the 1929 Mercedes Gazelle

Thanks everyone for their input. I bought a can of 3M Super Trim Adhesive, which cost a little more than 3M Trim Adhesive. In the instructions, the cheaper one is good for light headliner, and the better one is good for heavy headliner.
I'll let you know how is goes when I get there and try it.
cheers
Doug

_________________
book 4AGE build, Supra W58 transmission, Corolla GTS live axle

Yo!
I didn't really have anything of value to add... But now that the serious answers are out of the way...

A buddy of mine here in town runs a repair shop for old Jags and Triumphs. He's more "mechanical" repair than "body/fender/interior" stuff, but a good client wanted some trim re-attached to his car and my buddy agreed to do it.

He had a can of this stringy, yellow goo from 3M that was used for that kind of thing, but it was old and all dried up. He noted the number on the product and went to his favorite parts house. Told the counter man he needed some "3M Adhesive, part number XYZ" and got a blank stare. "Don't know if we carry that." Buddy said he'd bought it there before and described the stuff. Counter guy says, "Ohhh, you mean Gorilla Snot! Sure, we got that!"


JDK

_________________
JD, father of Quinn, Son of a... Build Log
Quinn the Slotus:Ford 302 Powered, Mallock-Inspired, Tube Frame, Hillclimb Special
"Gonzo and friends: Last night must have been quite a night. Camelot moments, mechanical marvels, Rustoleum launches, flying squirrels, fru-fru tea cuppers, V8 envy, Ensure catch cans -- and it wasn't even a full moon." -- SeattleTom

"you mean Gorilla Snot" - 50 years ago, and clear on the other side of the country, that's what we called it!

_________________
Mike - Read my story at http://twinlakesseven.blogspot.com/