LocostUSA.com
http://locostusa.com/forums/

Roll Bar Kit from Kinetic
http://locostusa.com/forums/viewtopic.php?f=23&t=12684
Page 1 of 1

Author:  hassleweed [ August 14, 2011, 3:20 pm ]
Post subject:  Roll Bar Kit from Kinetic

I promised to post this for Jack many weeks ago, but with baby arriving etc. etc., well no more excuses - here it is. I ordered a roll bar from Jack based on what I'd seen on his web page. He advised he had a new supplier that would fabricate the roll bar, and hence wanted me to share the result on this forum.

The roll bar came in pieces, including pre-bent hoop, cross-diagonal brace, horizontal bar and two rear stays. I had my own base plates. Everything arrived all taped together, shipped by fedex. The fish-mouths came out really well. I had to modify them on the rear stays, but that was to suit the car. Some minor tweeks of the diagonal brace were required, but that was basically as a result of where I wanted the horizontal bar to finish up.

The bends in the hoop show very slight decrease in diameter - I assume they were mandrel bent, but there's a small 'crease' nonetheless. Nothing that I'm concerned about.

I was nervous about welding this as it would be on show, but I was delighted with the outcome. I cannot comment yet on value as I haven't paid for it yet (or the nosecone) - I still need an invoice from Jack. Hi did assure me of a rough cost, and if true, then this turned out a great deal. Here's some pics:
Attachment:
File comment: Here are the pieces you get. Although the rear stays were fish-mouthed on one end only, Jack has said he'll probably change that and provide a different pair of angle cuts on the other ends.
S2010055.JPG
S2010055.JPG [ 419.42 KiB | Viewed 7350 times ]

Attachment:
File comment: Welding completed
S2010063.JPG
S2010063.JPG [ 421.19 KiB | Viewed 7350 times ]

Attachment:
File comment: All painted up
S2010078.JPG
S2010078.JPG [ 500.37 KiB | Viewed 7350 times ]

Attachment:
File comment: Fitted on the car
S2010085.JPG
S2010085.JPG [ 484.6 KiB | Viewed 7350 times ]


Martin

Author:  carguy123 [ August 14, 2011, 3:31 pm ]
Post subject:  Re: Roll Bar Kit from Kinetic

Very nice on both your part and Jack's.

That looks nice and should be easily removable.

Author:  JackMcCornack [ August 19, 2011, 12:25 am ]
Post subject:  Re: Roll Bar Kit from Kinetic

Thanks for posting that, Martin. Roll Cage Components is making these five bar rollbar kits for Kinetic now, and compared to doing these in house, well, they do so much of this kind of work (and buy so much more steel) that they can do it for significantly less than I can--thus the new price of $179. Woohoo, the opposite of inflation.

Author:  rx7locost [ August 19, 2011, 8:20 am ]
Post subject:  Re: Roll Bar Kit from Kinetic

Jack, when I saw Martin's post, I was wondering if Jimmy and you finally hooked up. Jimmy does great work. As you know, he built mine.

Great news!

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/