LocostUSA.com

Will still hold to my statement that it's a hell of a lot stronger than 1" sq 16 ga. tubing frames, but clearly your adds will be a significant improvement. They may have to get a little creative to deal with potential suspension conflict, but that shouldn't be insurmountable.

Oh, we are on boy! Care to put a case of beer behind that? If you drive half way across the country to give it to me, I'll even share it.

If they choose the red tubes, that doesn't effect anything behind the roll bar so no problems with suspension. I can walk thru this in Grape, but I need at least a case of beer for this level of effort. Also engineers and musicians are somewhat similar in that I may follow you home and live under your staircase or front porch for awhile...

_________________
Marcus Barrow - Car9 an open design community supported sports car for home builders!
SketchUp collection for LocostUSA: "Dream it, Build it, Drive it!"
Car9 Roadster information - models, drawings, resources etc.

Not sure the source of this pic but it shows one implementation that Horizonjob is mentioning. Ignore the red arrows. They were from an earlier discussion on the Goblin's chassis.



from viewtopic.php?f=2&t=17290&hilit=goblin

re: the new Goblin, I might even go as far to change the front roll hoop support.

_________________
Chuck.

“Any suspension will work if you don’t let it.” - Colin Chapman

Visit my ongoing MGB Rustoration log: over HERE

Or my Wankel powered Locost log : over HERE

And don't forget my Cushman Truckster resto Locostusa.com/forums/viewtopic.php?f=36&t=17766