LocostUSA.com
http://locostusa.com/forums/

Looking for a partially complete project or unfinished kit.
http://locostusa.com/forums/viewtopic.php?f=40&t=19084
Page 1 of 1

Author:  suprathepeg [ October 6, 2017, 9:05 am ]
Post subject:  Looking for a partially complete project or unfinished kit.

In central Canada (Manitoba) but willing to travel for the right setup.

Due to our import laws I am limited on what components I can source from the US unless the completed car can be proven to have been completed over 15 years ago. So I will entertain something from the US but prefer if it is already in Canada.

Car will be getting v8 power and used for drag/autox/track.

I'll look at anything but I prefer:

-442 frame size
-Live rear axle setup.
-without body skins attached could be a benefit at this stage of the build.

Don't need:
-motor
-Trans unless it bolts to a GM small block, Ideally LS.
-Rear diff unless it can handle higher torque ratings, if a smaller rear diff is already setup that isn't necessarily a deal breaker.

Let me know what you have.

Cheers,

Sean

Author:  alkidd [ October 9, 2017, 8:48 pm ]
Post subject:  Re: Looking for a partially complete project or unfinished k

Im in Ontariostan and have registered mine as 81 Corolla. Having built two I strongly suggest going as light as possible and forgoing the torque of a v8 for the lightness and HP/Torque of a 4cyl. My car is sub 1200lbs (excluding me) and am top 10 in every autocross I enter and am neck & neck against cars costing 5 times more.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/