LocostUSA.com

Selling various lotus 7 parts. I have changed drivetrains and so these no longer fit or are applicable.

First part is the headers for a Mazda Miata 1.8 liter engine that dumps into a 3” collector. Fits the car well and exits in front of the motor mount. Even if it isn’t the perfect fit it would get you started. Mild steel construction and coated.

Second is the Aprillia exhaust that was modified to fit the chassis perfectly. It has a 3” inlet and dual tips at the end. It had the first chamber removed to increase flow and the end plate rotated 180 degrees to push the exhaust downwards. Very streetable sounds and no issues making hp.

Full wiring harness from the Miata and stock ecu harness has a few megasquirt modifications but all are reversible. All non essential wires have been removed (stereo,power windows,power locks,emissions stuff etc)

Last piece is a shortened Miata driveshaft. It’s in good condition and has about 70k total miles on it - 4500 since being shortened. No vibration issues and bolts to a Miata 1.8 rear ended.

So here is the deal. $20 via PayPal for each piece plus shipping. Pretty much giving them away but the $20 means people who don’t need them won’t be inclined to take them. Happy to consolidate and do a deal! I want the space back.

Picture of exhaust

Any idea on shipping cost to Greensboro NC 27455?

I like the header and exhaust

_________________
Too much week, not enough weekend.

OOPS I did it again
http://www.locostusa.com/forums/viewtopic.php?f=35&t=17496

Blood Sweat and Beers
http://www.locostusa.com/forums/viewtopic.php?f=35&t=15216

Not knowing the exact weight- I would say about $75. Could look ltl freight which may be in the same area. If this price range sounds acceptable let me know and I’ll pull them down and measure more exactly.