this is a simplified model for anyone interested of a 79-to 94 mustang spindle with the factory 5 upper ball joint adapter assumed into the model.
It is only ball joint to ball joint with the spindle axis and tie rod location.
The Zip contains step files of the driver and passenger side and a dimensional PDF
Note: this is a very basic model focusing on the suspension geometry. The FF5 adapter was not modeled in. the low ball is the off the shelf press in mustang ball. the upper is the k772 chrysler threaded ball. I have not yet added in the wheel face of the brake rotor.
Attachment:
zip.zip
_________________
-STu
There is no shame in defeat, so long as the spirit is unconquered
My Build Log