LocostUSA.com https://locostusa.com/forums/ |
|
If I could find a cheap Kelmark GT project https://locostusa.com/forums/viewtopic.php?f=1&t=19436 |
Page 2 of 2 |
Author: | ngpmike [ June 14, 2018, 4:23 pm ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
Here's one out in the Los Angeles area. Looks like a good base to build on. Don't know how much you're looking to spend though. https://losangeles.craigslist.org/wst/cto/6617012647.html |
Author: | Raccoonman [ June 15, 2018, 8:52 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
Wish I'd seen that before I blew my tax refund |
Author: | turbo_bird [ June 17, 2018, 3:12 pm ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
I talked to the guy that bought my uncle's Kelmark at a local show and shine today. He hasn't done anything with it yet, but said he's going to put an Olds 455 in the back with a Riviera transaxle. He must have meant a Toronado transaxle, the Riviera was rear wheel drive. Apparently there were about 10 or so originally built like that back in the day. The guy does lots of car restorations and customer fab work, so he should be able to pull it off. Kristian |
Author: | Raccoonman [ June 18, 2018, 4:43 pm ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
good grief, Charlie Brown.... 455 is a torque monster. I think I'd take four plugs out before starting that one up |
Author: | GonzoRacer [ June 19, 2018, 8:27 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
Raccoonman wrote: I think I'd take four plugs out before starting that one up There was a joke/story about a Lotus with an engine swap, don't recall the details but most any Lotus and most any engine would "fit" the story..."They put a small-block Chevy in an original Lotus 7 chassis. Started the motor, blipped the throttle twice... And bent the frame." *EDIT* After reading that, I think just setting the Chevy down in the frame would bend it, no starting/blipping required! |
Author: | TRX [ June 20, 2018, 10:04 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
turbo_bird wrote: Olds 455 in the back with a Riviera transaxle. He must have meant a Toronado transaxle, the Riviera was rear wheel drive. '79-'85 were FWD; common platform with the Toro/Eldo. I don't know which transaxle they used, but at least one had the BOP bellhousing pattern since the Olds V8 was the base engine, and those were never available with any other bolt pattern. [edit] one of the car pages says the engine was "longitudinal". It may have used the original Toro/Eldo transmission. Those were monsters with Turbo 475 guts and 12-bolt differentials. Anyway, if a 307/350 will bolt up, so will a 455; all had the same bolt pattern. |
Author: | Raccoonman [ June 20, 2018, 12:19 pm ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
Eldo 500 should be no problem..... replacing seat cushions will get expensive |
Author: | RichardSIA [ December 26, 2018, 11:43 pm ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
Still looking? Here's one on CL in Sacto, https://sacramento.craigslist.org/cto/d ... 55738.html |
Author: | turbo_bird [ December 27, 2018, 1:53 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
The one my uncle sold is still sitting in the guy's driveway, I wonder if he'll get around to doing anything with it before the body is toast. It's been stored inside pretty much since new, now it's sitting outside in the weather. It's kind of funny that my uncle bought it as a running car with VW drivetrain, stripped it all out and never finished it, and now he's bought another VW based kit car to sruise around in. Should have just left the Kelmark alone and he would have had a cool car to drive for the past 20 years. Kristian |
Author: | trialsmangasgas [ December 27, 2018, 11:03 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
There was one on highway 57 on the south side of Sturgeon Bay, WI this summer for sale |
Author: | RichardSIA [ December 27, 2018, 11:18 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
Still available? They are out there if you look. https://barnfinds.com/exclusive-kelmark-gt-1/ |
Author: | RichardSIA [ January 28, 2019, 2:54 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
You are not going to find a cheaper deal than this one unless it's been wrecked! https://reno.craigslist.org/pts/d/reno-kelmark-gt-kit-car-body/6781273026.html Only $800, I'm very tempted by it myself! |
Author: | TRX [ January 29, 2019, 12:43 pm ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
Plenty of room for your Alfa engine, and it'd save a ton of bodywork! |
Author: | rx7locost [ January 29, 2019, 3:09 pm ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
You know you want it...…. |
Author: | RichardSIA [ January 30, 2019, 2:23 am ] |
Post subject: | Re: If I could find a cheap Kelmark GT project |
I also know know I'd want to put a V6-5 Speed Fiero under it! OP should grab this one. Possiby changing jobs and then having to do a long commute so not the best time to get another project. But there is a TR7 convertible that "Ran when parked" I am kind of looking at. Only because it would be fairly good on gas and is much less of a project than all my current projects. |
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |