Got some things done today.
The front fenders are going to be tricky since there is not much room at full lock. I have an idea and will post it once I can update the model
Attachment:
20201224_134533_copy_1612x907.jpg
]
Now for the shocks. Last year I got a shorter pair of socks (valving reasons) and now I am trying to mount them. It looks like I will need to add another tube in which might look dumb. Thoughts?
Attachment:
20201224_143750_copy_1612x907.jpg
Attachment:
20201224_144228_copy_1612x907.jpg
Finally committed to the mounting on the shock cover using push button latches. I'm not a fan of the posts on the chassis but they work.
Attachment:
20201224_154207_copy_1612x907.jpg
Attachment:
20201224_155155_copy_1612x907.jpg
So the last issue i am struggling with... The font tabs were spaced incorrectly when the were welded on so they don't look right (rear are fine). I am debating on cutting these off and redoing them but I don't want to compromise the tube they attach too. If I was to fix them this would be the time to do it. However they have lasted this long so they are a "looks" thing at this point.
Attachment:
20201224_134638_copy_1612x907.jpg
Attachment:
20201224_135046_copy_1612x907.jpg