| LocostUSA.com https://locostusa.com/forums/ |
|
| Rear body panel shaping, fitting, cutting etc (videos) https://locostusa.com/forums/viewtopic.php?f=18&t=21666 |
Page 1 of 1 |
| Author: | Robin [ March 23, 2022, 9:03 am ] |
| Post subject: | Rear body panel shaping, fitting, cutting etc (videos) |
Looking for videos of shaping the rear body panel especially around the upper and lower corners of the locost, caterham super seven? |
|
| Author: | Miatav8,MstrASE,A&P,F [ March 24, 2022, 1:35 pm ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
I don't know of any videos like that. There are a number ways to do it. Are you trying to roll the skin around the tubing? |
|
| Author: | Lonnie-S [ March 24, 2022, 8:46 pm ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
If you have the Chris Gibbs book on the Gen 2 version of the Haynes Roadster, you'll find some instruction on pages 92-93, but it's not extensive. You'll at least see the tools. Cheers, |
|
| Author: | TooBusy [ March 25, 2022, 9:03 am ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
No video, but I did shoot a series of pics and post to Locost 7 Builders page on fb. Now you'll have to look a ways back 7/13/2020 to be precise I did a multi pic segment on forming around the cockpit arches. 6/29/2020 I did the same for the rear panel. |
|
| Author: | Lonnie-S [ March 25, 2022, 9:59 am ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
@TooBusy Do you have time to repost here? There are probably a lot of us who don't use Facebook. Cheers, |
|
| Author: | mainlandboy [ March 31, 2022, 7:04 pm ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
Fast forward to 3:14 in the following video for some tips on shaping the rear panel around the curved tubes: https://www.youtube.com/watch?v=yhYmafA4lTI |
|
| Author: | skippopotamus [ June 7, 2022, 12:17 pm ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
I was able to cruise through the pics in TooBusy's posts even after I logged out of Facebook. Side: https://www.facebook.com/Locost7Builder ... 6966694057 Rear: https://www.facebook.com/Locost7Builder ... 6483263439 Thanks TooBusy! |
|
| Author: | Lonnie-S [ June 9, 2022, 9:41 am ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
@skippopotamus I go a "Must log in to continue" message when I tried to view them. Cheers, |
|
| Author: | skippopotamus [ June 11, 2022, 4:24 pm ] |
| Post subject: | Re: Rear body panel shaping, fitting, cutting etc (videos) |
Yep. Lonnie, I was able to replicate what you're seeing by deleting cookies and cache. It'll prompt you without some unknown to me cookie in your browser. BUMMER! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB® Forum Software © phpBB Group https://www.phpbb.com/ |
|