cool trunk for a se7en

Bodywork, finishing and painting - everything that makes your locost into an eye candy!

Moderators: dhempy, a.moore

Post Reply
User avatar
trialsmangasgas
Posts: 1600
Joined: March 3, 2006, 10:48 pm
Location: Shawnee, Ks

cool trunk for a se7en

Post by trialsmangasgas »

You meet the nicest people in a Locost Se7en.
User avatar
kabuku6
Posts: 117
Joined: September 30, 2020, 11:44 am
Building: 22r Based Locost
Location: Eastern Oregon

Re: cool trunk for a se7en

Post by kabuku6 »

Could be neat to make a sort of modular system, so you could mount a spare or extra luggage. Although if I was going far enough to want extra luggage, I'd probably want a spare tire as well.
Cheers,
Logan
User avatar
Miatav8,MstrASE,A&P,F
Automotive Encyclopedia
Posts: 8104
Joined: December 22, 2006, 2:05 pm

Re: cool trunk for a se7en

Post by Miatav8,MstrASE,A&P,F »

Imho, a must-have is a plug kit with a mini air compressor, even if you carry a spare and jack. If it will roll to expose the puncture, a jack isn't needed either but it does make the process easier. Most spares are not checked regularly for pressure and plugging is quicker/easier. I've never had a plug fail.

I once encountered a road where nails had been dumped. Many cars changing tires and they get one shot to keep going. I had to plug a tire three times with three different punctures to go a mile, and each time was quicker than jacking and changing a tire.

A removable case above the fuel tank could be made to fit, lock, and look like part of the car.
Miata UBJ: ES-2074R('70s maz pickup)
Ford IFS viewtopic.php?f=5&t=13225&p=134742
Simple Spring select viewtopic.php?f=5&t=11815
LxWxHt
360LA 442E: 134.5x46x15
Lotus7:115x39x7.25
Tiger Avon:114x40x13.3-12.6
Champion/Book:114x42x11
Gibbs/Haynes:122x42x14
VoDou:113x44x14
McSorley 442:122x46x14
Collins 241:127x46x12
User avatar
Lonnie-S
Posts: 5326
Joined: October 24, 2008, 2:13 pm
Building: V6 Powered Locost
Location: Carlsbad, California, USA

Re: cool trunk for a se7en

Post by Lonnie-S »

That's an interesting approach that's nicely done.

I was always thinking of my own build as one I'd like to go places in, as in take touring. Storage space is definitely an issue. There are some other options too like: saddle bags on the spare tire; rack atop a hard boot cover; towing small trailer, etc., etc.

Of course, if you're going solo, the passenger side footwell and seat become options too.

Cheers,
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886
User avatar
rx7locost
Posts: 6420
Joined: July 17, 2008, 9:11 am
Location: West Chicago,IL

Re: cool trunk for a se7en

Post by rx7locost »

FWIW, if you are planning on making something like this for your Locost, be sure to consider a movable license plate and lamp as it must be visible with the trunk in place. Just something to think about in your design.

Some may remember that I built a luggage rack for my Locost. Not as pretty as the one shown but a bit more versatile, even if I do say myself. :roll:
Chuck.

“Any suspension will work if you don’t let it.” - Colin Chapman

Visit my ongoing MGB Rustoration log: over HERE

Or my Wankel powered Locost log : over HERE

And don't forget my Cushman Truckster resto Locostusa.com/forums/viewtopic.php?f=36&t=17766
User avatar
davew
Posts: 1885
Joined: September 22, 2005, 8:12 am
Building: 4age locost
Location: 4AGE in S.E. Michigan

Re: cool trunk for a se7en

Post by davew »

I would 2nd Chucks luggage rack. Its differently more versatile. A removable license plate and lamp might be required. But I see a lot of car racks stacked with camping gear and coolers, here in Michigan and there no way is it possible to see the license plate. You should probably check with your state about the plate. My rack has a movable plate mount but no lite. But I very rarely drive the Seven at nite. You are seated so low that both on coming and head lites behind you are right in your eyes. :ack:
User avatar
Kellerkind
Posts: 3
Joined: November 27, 2023, 8:43 am
Building: 7
Location: Palatiate Forest, Germany
Contact:

Re: cool trunk for a se7en

Post by Kellerkind »

Hi everybody and kind regards from good old Europe.

Thank you for your interest and I'm happy you like the rack design, much appreciated, thank you.
The original was invented by Ralf Angetter from www.gd-collection.de and he owns a trademark/copyright on it. Feel free to copy and build one for your own use but please dont sell or trade.

I modified Ralfs original a bit and used hard-soldered steel instead of Aluminum. The rack is very variable, one or two cases can be transported. I have several cases: One with spareparts, one with campinggear or an other one with two person camping kittchen, depending where I go and what I go for.
The cases can be simply taken off just to take them with you into the hotel or tent.

Due to German law there is an additional number plate on the box, fixed with Velcro fastener for safe hold and easy taking off. The original plate remains fixed on the car underneath the case.

I could post some details and photos if you like.

Kind regards Jens
User avatar
JackMcCornack
Posts: 3176
Joined: July 29, 2006, 9:10 pm
Location: Oregon, usually

Re: cool trunk for a se7en

Post by JackMcCornack »

Kellerkind wrote:I could post some details and photos if you like.

Kind regards Jens
Welcome aboard! I'm confident details and photos will be appreciated, but due to the quirks of our computery stuff, you'll need to post one more prose submission before you can engage in photo display.
Locost builder and adventurer, and founder (but no longer owner) of Kinetic Vehicles
User avatar
Kellerkind
Posts: 3
Joined: November 27, 2023, 8:43 am
Building: 7
Location: Palatiate Forest, Germany
Contact:

Re: cool trunk for a se7en

Post by Kellerkind »

Great, thank you!
User avatar
tibimakai
Posts: 582
Joined: January 14, 2021, 12:19 pm
Building: 442E
Location: San Dimas, CA

Re: cool trunk for a se7en

Post by tibimakai »

Thanks Jen, for finding this thread, I'm the one from Youtube.
Tibor


'20 Alfa Romeo Stelvio daily
Locost/442E in progress
User avatar
Kellerkind
Posts: 3
Joined: November 27, 2023, 8:43 am
Building: 7
Location: Palatiate Forest, Germany
Contact:

Re: cool trunk for a se7en

Post by Kellerkind »

Hello everybody

Okay, here we go.

The basic design is not too complicated: Two 3mm thick and 20mm wide steel profiles from the DIY Store.
Each bent hooklike, two little hard-soldered noses with 20mm M6 screws to hold the box and aditionally some kurled nuts to keep the case from jumping off.
The hooks set into the space where the rollbar is fixed to the frame, thus keeping them from sliding sidewarts, the hooks underpart is screwed to the cars frame where usually the spare tyre holder is fixed.

Image
Hooks

Image
Hard-soldered noses

Image
Screw and some shrink tubing to keep the box from rattleing

Image
The cases (bako safe case, http://www.bako.de) have a stiff aluminum frame that can be used for fixing, just some holes drilled in.

Image
Fixed with kurled nuts

Image
Complete! Yeah!

Image

Image

Image

Image

Image

Thank you very much for your interest, kind regards Jens
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest