LocostUSA.com
https://locostusa.com/forums/

HFmaxi's 2L TI-VCT Haynes Roadster
https://locostusa.com/forums/viewtopic.php?f=33&t=20900		 Page 2 of 2
Author:  Lonnie-S [ July 20, 2023, 10:45 am ]
Post subject:  Re: HFmaxi's 2L TI-VCT Haynes Roadster
Nice.

I don't know how I missed that racetrack video (above), but I enjoyed it this morning.

Cheers,
Author:  hfmaxi [ September 13, 2023, 6:56 pm ]
Post subject:  Re: HFmaxi's 2L TI-VCT Haynes Roadster
Made a splitter and diffuser for the car. It's unknown what the impact is but I can still get the car on and off the trailer and nothing fell off at speed at the track. The design was short of borrowed from a Caterham blog http://csr200.blogspot.com/2014/05/rear-diffusor-and-front-splitter.html. Either way I had never made anything from carbon fiber before. Design is a carbon / foam sandwich, splitter is a pound or so and diffuser around three, seems pretty light for what they are to me. Including a couple picts of the mounting system and a pict of my high tech splitter deflection measuring system. Vertical section of the splitter is aluminum glued to the carbon with six ten epoxy and a wrap. Rear diffuser mounts are two piece so they don't stick out when the diffuser is off. Should have an aeroscreen done soon.

Attachment:
epoxy.jpg


Attachment:
splitter.jpg


Attachment:
splitter mounts.jpg


Attachment:
splitter deflection.jpg


Attachment:
diffuser.jpg


Attachment:
diffuser mounts.jpg
Author:  hfmaxi [ October 3, 2023, 4:54 pm ]
Post subject:  Re: HFmaxi's 2L TI-VCT Haynes Roadster
Made a foot rest. If you look closely you'll see the new aeroscreen as well. Will be at NJMP Seven's again this year to give it a whirl.

Attachment:
foot rest small.jpg
Author:  Lonnie-S [ October 3, 2023, 10:31 pm ]
Post subject:  Re: HFmaxi's 2L TI-VCT Haynes Roadster
Very fancy and excellent looking.

Cheers,
Page 2 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB® Forum Software © phpBB Group
https://www.phpbb.com/