About 99% finished with the engine mounts now. Had to take a little off the stock Miata mount shields to be sure they wouldn't foul the chassis, and after looking at them I decided that the engine end needed further bracing so I made a raised edge on both. The right side mount still needs the spacer that the starter bracket mounts to fabbed up and welded in, but I need to clean the starter before it gets anywhere near the freshly cleaned/painted engine, it's really disgusting as is everything else that was bolted onto the engine, it clearly was a leaker for quite a while.
left side mount...
Attachment:
253184239_10225095556690069_6641033086714128767_n.jpg
Right side mount...
Attachment:
251825072_10225096146464813_5953842005897744366_n.jpg