More updates...
I did more cutting on the front of the car to clearance for the subframe and it's now sitting approximately where it needs to be. Cut the front of the nose off completely now just ahead of my axle centerline markings. It's getting a one-piece fiberglass nose and OEM non rusty German sheet metal with no accident damage is quite saleable. Also finished up the lower chassis and got it under the car. Need to line it up, bolt it in securely, then I can set the final position of the front subframe. Then on to the rear.
Welcome to "it's not sketchy when I do it" land. It worked though.
Attachment:
240399926_10224686406021558_6274850470362302940_n.jpg
Attachment:
240128333_10224686406381567_8363277066627433614_n.jpg
And lower chassis sitting roughly in place.
Attachment:
240450745_10224686406741576_7708141306173844495_n.jpg
And a couple of the front subframe sitting roughly in place on the lower chassis. Another cross piece will be added to the chassis just behind the lower rear mount holes in the subframe with tabs to mount it to.
Attachment:
240447876_10224708684498506_8022299231270487249_n.jpg
Attachment:
240115210_10224708684818514_2298847181775360097_n.jpg