LocostUSA.com

Learning how to build Lotus Seven replicas...together!
It is currently September 25, 2021, 3:40 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Rear end question?
PostPosted: September 14, 2021, 4:29 pm 
Online

Joined: December 27, 2013, 12:17 pm
Posts: 14
Hello all.....
Started second build in two years, already have road legal seven type car, now i started my trackday project, FIAT 20VT engine used with BMW E39 gearbox, lot of experience with it, can easily produce 350bhp on stock internals.
Anyway, my second chassis is bit longer and wider than Mcsorley 442E, i followed its basic drawings, but just when painted the frame with all welding done, i saw that i forgot to add a tube between diff - wishbone carrier and back side upper rail.
Question is simple - should i add marked in red tubes, or it's not big deal if without it.
Thanks


Attachments:
IMG_20210914_141848.jpg
IMG_20210914_141848.jpg [ 278.45 KiB | Viewed 197 times ]
IMG_20210914_141748.jpg
IMG_20210914_141748.jpg [ 282.95 KiB | Viewed 197 times ]


Last edited by ferrarist75 on September 15, 2021, 1:57 am, edited 1 time in total.
Top
 Profile  
Reply with quote  
 Post subject: Re: Rear end question?
PostPosted: September 14, 2021, 8:08 pm 
Offline
Automotive Encyclopedia
User avatar

Joined: December 22, 2006, 2:05 pm
Posts: 7052
Location: "Banana Republic"
Need better pics from different angles to consider if you need more tubes. Not sure what reference you are using for the irs mod to the 442e, maybe the haynes?

_________________
My posts are my own opinion and do not represent an official public position by any other person, place, thing, animal, vegetable, mineral, etc.

https://www.azsenaterepublicans.com/audit

https://truthinenergyandclimate.com/


Top
 Profile  
Reply with quote  
 Post subject: Re: Rear end question?
PostPosted: September 17, 2021, 9:16 am 
Offline
User avatar

Joined: July 17, 2008, 9:11 am
Posts: 5935
Location: West Chicago,IL
Take the upper end of the line in pic #2 and move it outward to the junction of the of the shock box and the lateral tube. This will provide both vertical support of the rear "suspension/diff box" and lateral stability also. Here is what I did, with an RX7 rear diff:
Attachment:
frame with roll bar.JPG
frame with roll bar.JPG [ 66.98 KiB | Viewed 81 times ]


In my build, the lower short tube also tied to the suspension/diff box was intended to provide stabilizing the outer skin. My frame started out as a CMC chassis that I converted to IRS, I think before anyone had plans for the IRS published.

_________________
Chuck.

“Any suspension will work if you don’t let it.” - Colin Chapman

Visit my ongoing MGB Rustoration log: over HERE

Or my Wankel powered Locost log : over HERE


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
POWERED_BY