LocostUSA.com

I am in need of an exhaust shield.

Anybody have one for sale?

Robert-
Need a little more detail. What size are you looking for? Is it for a muffler or exhaust pipe? Or?

It's little hard to find one just exactly as you need it or can you modify a shield or build one from scratch?

I tried a number of places and this one seemed to have an assortment:

http://www.classicchambered.com/classic/Heat.html

I'm not really sure where I got the shield but I had to modify it to fit my needs.

I'll do a little more searching to see it I can find any more sources. I vaguely remember I found a place that sells muffler shields for semi trucks.

Cheers,
Roy

_________________
Build log http://www.locostusa.com/forums/viewtopic.php?t=16510

Here's two more sources.

https://www.bigrigchromeshop.com/heat-s ... _1267.html

https://www.truckpipesusa.com/products/ ... ckets.html

_________________
Build log http://www.locostusa.com/forums/viewtopic.php?t=16510

If you can do some fabbing these folks have a great selection of metal.

https://www.mcnichols.com/

_________________
Larry in Seattle

Have you considered rolling your own out of perforated sheet metal?

A major supplier in my area has 24" x 48" sheets in 16 gauge plain steel for $64. The holes are staggered 3/8" on 9/16" centers. You could have a local sheet metal shop roll it, make some brackets yourself, apply some high temp, rattle can paint, and probably spend less than $200.

It's a thought anyway.

Cheers,

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886

Header wrap is another option and probably the easiest, most cost effective, and keeps the exhaust from looking bigger than it is with shields that still get hot.

_________________
Miata UBJ: ES-2074R('70s maz pickup)
Ford IFS cheap viewtopic.php?f=5&t=13225&p=134742
Simple Spring select viewtopic.php?f=5&t=11815
Frame LxcockpitWxengbayH
Lotus 7:115x39x7.25
Tiger Avon:114x40x13.3-12.6
Champion/Book:114x42x11
Gibbs/Haynes:122x42x14
VoDou:113x44x14
McSorley 442:122x46x14
Collins 241:127x46x12

Depending on the size you need - there are some odd options around. I found a Murray mower shield on eBay. Brackets were found there too.
Oops - Walker…

I used this one & made brackets to hold it on with hose clamps:

https://www.jegs.com/i/Patriot-Exhaust/ ... 2/10002/-1