LocostUSA.com

For sale: Two sets of Sparco Seat Track Sliders. These were planned for a previous project but put in storage instead. So they're new, never used (maybe mocked up?), with minor storage blems. Summit sells these for $80 each set. I'm asking $50 each set for these, plus shipping.

In Sparco's words: "The track set also known as sliders are recommended for any seat application. The seat track set allows you to adjust the seat position. The seat tracks employ a double locking mechanism for increased safety."

This pic shows one set. The other set is just like it:
And an official Sparco beauty shot:

PM or email me if interested in either or both sets.

_________________
Cheers, Tom

My Car9 build: viewtopic.php?f=35&t=14613
"It's the construction of the car-the sheer lunacy and joy of making diverse parts come together and work as one-that counts."
Ultima Spyder, Northstar 4.0, Porsche G50/52

Just for extra info, I bought some sliders like these and they are well made, hell for stout. I think from front to rear positions the travel was a little less than 7”.

_________________
japanese proverb - If you fall down seven times.............stand up eight.

These are still available. I'm doing some spring cleaning in the garage and its time to move 'em along.

_________________
Cheers, Tom

My Car9 build: viewtopic.php?f=35&t=14613
"It's the construction of the car-the sheer lunacy and joy of making diverse parts come together and work as one-that counts."
Ultima Spyder, Northstar 4.0, Porsche G50/52

Can you measure the bolt hole spacing (across & lengthwise) on these (frame & seat mounts)?

_________________
1975 MG Midget
http://www.locostusa.com/forums/viewtopic.php?f=36&t=24382
13B Powered Rotus Geauxkart
http://www.locostusa.com/forums/viewtopic.php?f=35&t=20899

Hi JAMADOR,

For the side that bolts to the floor, the bolt holes in the mounting rails are 12.7" apart fore and aft and 13.7" apart side-to-side.
For the side that bolts to the seat, the bolt holes are 10.7" apart fore and aft and 13.7" apart side-to-side.
The side-to-side distance between the rails could be changed by lengthening or shortening the tubular adjustment bar.
The bolt holes are sized for 5/16" or 8mm bolts.

Hope that answers you questions.

_________________
Cheers, Tom

My Car9 build: viewtopic.php?f=35&t=14613
"It's the construction of the car-the sheer lunacy and joy of making diverse parts come together and work as one-that counts."
Ultima Spyder, Northstar 4.0, Porsche G50/52

Thanks, not sure these would work with how mine is set up currently, without frame modifications.

DS frame mount: 11" fore/aft & 10.5" L/R
PS frame mount (solid mount seat to frame): 7.5" fore/aft & 13" L/R

_________________
1975 MG Midget
http://www.locostusa.com/forums/viewtopic.php?f=36&t=24382
13B Powered Rotus Geauxkart
http://www.locostusa.com/forums/viewtopic.php?f=35&t=20899

Sold!

_________________
Cheers, Tom

My Car9 build: viewtopic.php?f=35&t=14613
"It's the construction of the car-the sheer lunacy and joy of making diverse parts come together and work as one-that counts."
Ultima Spyder, Northstar 4.0, Porsche G50/52