LocostUSA.com

Learning how to build Lotus Seven replicas...together!
It is currently March 29, 2024, 2:35 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 10 posts ] 
Author Message
 Post subject: Test Rig for Auto Lights
PostPosted: February 10, 2020, 1:50 pm 
Offline
User avatar

Joined: October 24, 2008, 2:13 pm
Posts: 5326
Location: Carlsbad, California, USA
I'm going to start setting up some lights, including some LED lights, in a day or two. I'd like to have a test rig (12V source) that's safe to use to test the lights as they're installed. I do have my old donor battery, but I'm hesitant to use it as a direct source. Any suggestions?

I'm open to buying or building one.

Cheers,

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886


Top
 Profile  
Reply with quote  
PostPosted: February 10, 2020, 2:12 pm 
Offline
User avatar

Joined: March 19, 2011, 10:22 am
Posts: 2386
Location: Holden, Alberta, Canada
I've used a 12V car battery many times for testing lights.
If you want, install a 10-20A inline fuse or circuit breaker on the +ve lead wire. For that matter you could also install a toggle switch.

When I worked in the gas company automotive shop, we had a wooden box set up with a car battery that had a circuit breaker and toggle switch. It had RCA style jacks that you plugged the +ve and -ve leads into.

_________________
Perry

'If man built it, man can fix it'
"No one ever told me I couldn't do it."
"If you can't build it safe, don't build it."

Perry's Locost Super Che7enette Build
Perry's TBird Based 5.0L Super 7 L.S.O
Perry's S10 Super 7 The 3rd
Perry's 4th Build The Topolino 500 (Little Mouse) Altered
Perry's 5th Build the Super Slant 6 Super 7
Perry's Final Build the 1929 Mercedes Gazelle


Top
 Profile  
Reply with quote  
PostPosted: February 10, 2020, 3:18 pm 
Offline
User avatar

Joined: July 6, 2008, 12:48 am
Posts: 653
Location: Amador County, CA
For car audio testing I’ve always used a battery with a charger on it at the same time to hold voltage between 12 and 14. For longer term testing you can get decently large 12v power supplies on amazon. Just watch the amperage draw on those lights. But you should be fine with just a battery and charger. Use a fuse if you feel safer that way.

_________________
+442 - Miata


Top
 Profile  
Reply with quote  
PostPosted: February 10, 2020, 5:57 pm 
Offline

Joined: February 8, 2014, 10:47 pm
Posts: 781
Location: Cornelius OR
Instead of a fuse you can use a headlight in series.
It will light if there is a short, glow dimly for higher loads.

_________________
Honey anyone?


Top
 Profile  
Reply with quote  
PostPosted: February 10, 2020, 7:48 pm 
Offline
Automotive Encyclopedia
User avatar

Joined: December 22, 2006, 2:05 pm
Posts: 8037
When I was in aircraft mech school, I used to connect jumper cables to a battery and a starter than drag the ground down the case and watch the airframers run for cover. Fine wire to a classmates metal frame chair (rivetted seat area) and the other end to a magneto I would spin ocassionally. Charge large capacitors and toss them to class mates. Electricity never hurt anybody, right? :shock: :roll:

_________________
Miata UBJ: ES-2074R('70s maz pickup)
Ford IFS viewtopic.php?f=5&t=13225&p=134742
Simple Spring select viewtopic.php?f=5&t=11815
LxWxHt
360LA 442E: 134.5x46x15
Lotus7:115x39x7.25
Tiger Avon:114x40x13.3-12.6
Champion/Book:114x42x11
Gibbs/Haynes:122x42x14
VoDou:113x44x14
McSorley 442:122x46x14
Collins 241:127x46x12


Top
 Profile  
Reply with quote  
PostPosted: February 10, 2020, 8:13 pm 
Offline

Joined: September 16, 2009, 9:36 am
Posts: 27
Do yourself a favor and go out and buy a Power Probe tester. https://www.powerprobe.com/ I bought one couple of years ago and last year upgraded to the gen3. Wasn't sure I'd use it that much but it was on sale. Now it is my go to tool for anything electrical. Can't say enough good about it.
Image


Top
 Profile  
Reply with quote  
PostPosted: February 11, 2020, 7:07 pm 
Offline
User avatar

Joined: October 24, 2008, 2:13 pm
Posts: 5326
Location: Carlsbad, California, USA
horchoha wrote:
I've used a 12V car battery many times for testing lights.
If you want, install a 10-20A inline fuse or circuit breaker on the +ve lead wire. For that matter you could also install a toggle switch.

When I worked in the gas company automotive shop, we had a wooden box set up with a car battery that had a circuit breaker and toggle switch. It had RCA style jacks that you plugged the +ve and -ve leads into.

That sounds like a pretty simple solution. What type of circuit breaker did you use?

Cheers,

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886


Top
 Profile  
Reply with quote  
PostPosted: February 11, 2020, 7:19 pm 
Offline
User avatar

Joined: October 24, 2008, 2:13 pm
Posts: 5326
Location: Carlsbad, California, USA
@toylocost
@Bent Wrench
Perry's solution uses what I have except for the circuit breaker and toggle switch. I have some old RCA jacks in my toolbox and a toggle switch is pretty cheap.

@MV8
What a naughty boy you were. And yes, electricity will definitely hurt you. I started learning about cars on old Ford flatheads. You know, the ones with the unguarded spark plug wires. I had many encounters with those under power.
Attachment:
Flathead spark plug wires.jpg



@berg
That's a nice tool, but $400 is a little rich for my blood. Thank you, though.

Cheers,


You do not have the required permissions to view the files attached to this post.

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886


Top
 Profile  
Reply with quote  
PostPosted: February 12, 2020, 4:11 am 
Offline
User avatar

Joined: March 19, 2011, 10:22 am
Posts: 2386
Location: Holden, Alberta, Canada
For the test box it was a breaker like this which is mountable to the box.
https://www.delcity.net/store/12V-Auto-Reset-Circuit-Breakers/p_198669.h_198846

_________________
Perry

'If man built it, man can fix it'
"No one ever told me I couldn't do it."
"If you can't build it safe, don't build it."

Perry's Locost Super Che7enette Build
Perry's TBird Based 5.0L Super 7 L.S.O
Perry's S10 Super 7 The 3rd
Perry's 4th Build The Topolino 500 (Little Mouse) Altered
Perry's 5th Build the Super Slant 6 Super 7
Perry's Final Build the 1929 Mercedes Gazelle


Top
 Profile  
Reply with quote  
PostPosted: February 12, 2020, 10:08 am 
Offline
User avatar

Joined: October 24, 2008, 2:13 pm
Posts: 5326
Location: Carlsbad, California, USA
@horchoha
Thank you, Perry.

_________________
Damn! That front slip angle is way too large and the Ackerman is just a muddle.

Build Log: viewtopic.php?f=35&t=5886


Top
 Profile  
Reply with quote  
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours [ DST ]


Who is online

Users browsing this forum: No registered users and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
POWERED_BY