alkidd wrote:
Located in Georgetown outside Toronto. Sorry to the US, but theres no way to cross so this is open to Canadians only. I have the demo MCC 7 as built by Ken Howatson and the Feijer brothers depending on what part of the story you think is true. It is powered by a Toyota 2tg Engine with side draft carbs. Up until a couple years ago it was a running driving car but I broke the diff. In fixing the diff, I added an LSD disk brake rear end from an ae86, long shaft T50 trans and changed the engine from 1.6l to 1.9l by mixing in a crank and rods from a Toyota 3t engine. Its a really long story. In the middle of all that was a heart attack and a demand to take it easy so I decided to make it fuel injection (microsquirt). 3/4 of the way there but Ive lost my steam to complete. Its a rolling chasis that needs to have the wiring and tuning completed or put back the carbs and distributor. I have tons of parts including the clamshell fenders extra shocks etc etc. Seats by JK composites in England. Have a guy who wants the driveline. Will sell the frame, cowl, bonnet, etc as one, or complete. $6K Cdn with the microsquirt stuff $5200 without. Can help transport or for some extra$ supply a trailer that was built to move the 7 around. Shown in the picture.
Was the 7 registered and insured in Ontario?