EDIT: Don't get me wrong, I love spaghetti (and rewiring too).
Locost 11 R1
Moderators: a.moore, JackMcCornack
-
horchoha
- Posts: 2545
- Joined: March 19, 2011, 10:22 am
- Building: locost super seven
- Location: Holden, Alberta, Canada
Re: Locost 11 R1
Looks like a spaghetti recipe
EDIT: Don't get me wrong, I love spaghetti (and rewiring too).
EDIT: Don't get me wrong, I love spaghetti (and rewiring too).
Perry
'If man built it, man can fix it'
"No one ever told me I couldn't do it."
"If you can't build it safe, don't build it."
Perry's Locost Super Che7enette Build
Perry's TBird Based 5.0L Super 7 L.S.O
Perry's S10 Super 7 The 3rd
Perry's 4th Build The Topolino 500 (Little Mouse) Altered
Perry's 5th Build the Super Slant 6 Super 7
Perry's Final Build the 1929 Mercedes Gazelle
'If man built it, man can fix it'
"No one ever told me I couldn't do it."
"If you can't build it safe, don't build it."
Perry's Locost Super Che7enette Build
Perry's TBird Based 5.0L Super 7 L.S.O
Perry's S10 Super 7 The 3rd
Perry's 4th Build The Topolino 500 (Little Mouse) Altered
Perry's 5th Build the Super Slant 6 Super 7
Perry's Final Build the 1929 Mercedes Gazelle
-
cs3tcr
- Posts: 1049
- Joined: December 29, 2007, 10:41 pm
- Location: Vancouver, BC
Re: Locost 11 R1
I was doing the same thing a few weekends ago, but mine was definitely less complicated:
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
Nice to see its just not me .
Starter the center switch plate mount.
Trimmed two tubes and will weld tomorrow.
Also installed the bike dash. Not sure I like it now ?
And their is the line lock/parking brake mount ?
Then back to planning the switch placement ?
Starter the center switch plate mount.
Trimmed two tubes and will weld tomorrow.
Also installed the bike dash. Not sure I like it now ?
And their is the line lock/parking brake mount ?
Then back to planning the switch placement ?
You do not have the required permissions to view the files attached to this post.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
What have I done ?????
You do not have the required permissions to view the files attached to this post.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
horchoha
- Posts: 2545
- Joined: March 19, 2011, 10:22 am
- Building: locost super seven
- Location: Holden, Alberta, Canada
Re: Locost 11 R1
Atta boy!
Don't let fear and confusion hold you back
Good job
Don't let fear and confusion hold you back
Good job
Perry
'If man built it, man can fix it'
"No one ever told me I couldn't do it."
"If you can't build it safe, don't build it."
Perry's Locost Super Che7enette Build
Perry's TBird Based 5.0L Super 7 L.S.O
Perry's S10 Super 7 The 3rd
Perry's 4th Build The Topolino 500 (Little Mouse) Altered
Perry's 5th Build the Super Slant 6 Super 7
Perry's Final Build the 1929 Mercedes Gazelle
'If man built it, man can fix it'
"No one ever told me I couldn't do it."
"If you can't build it safe, don't build it."
Perry's Locost Super Che7enette Build
Perry's TBird Based 5.0L Super 7 L.S.O
Perry's S10 Super 7 The 3rd
Perry's 4th Build The Topolino 500 (Little Mouse) Altered
Perry's 5th Build the Super Slant 6 Super 7
Perry's Final Build the 1929 Mercedes Gazelle
-
tibimakai
- Posts: 680
- Joined: January 14, 2021, 12:19 pm
- Building: 442E
- Location: San Dimas, CA
Re: Locost 11 R1
That looks like a lot of fun.
I have to start from scratch, and I don't know anything about this stuff.
I have to start from scratch, and I don't know anything about this stuff.
Tibor
'20 Alfa Romeo Stelvio daily
Locost/442E in progress
'20 Alfa Romeo Stelvio daily
Locost/442E in progress
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
Trying to work out the master OFF switch ?
Going to make it a part of the front hood section ?
Keeps from putting holes in the bulk head. Maybe ?
Switch will be mounted to a plate under the hood and just a hole for the lever.
Also got the fuel filter mounted and the fuel pump.
Needed to play with the hose rutting . Not sure I like it ?
Going to make a plate to replace the fender washers. It looks funny.
As you can see I am putting all the wiring off as long as I can. LOL
I will start with the front and rear lights and work out from their. I think ?
Going to make it a part of the front hood section ?
Keeps from putting holes in the bulk head. Maybe ?
Switch will be mounted to a plate under the hood and just a hole for the lever.
Also got the fuel filter mounted and the fuel pump.
Needed to play with the hose rutting . Not sure I like it ?
Going to make a plate to replace the fender washers. It looks funny.
As you can see I am putting all the wiring off as long as I can. LOL
I will start with the front and rear lights and work out from their. I think ?
You do not have the required permissions to view the files attached to this post.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
Been thinking about the Master Power Cut-OFF switch.
What about putting it on the passenger side dash ?
Just don't want to ruie the body lines.
What about putting it on the passenger side dash ?
Just don't want to ruie the body lines.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
On the Dash ?
You do not have the required permissions to view the files attached to this post.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
cs3tcr
- Posts: 1049
- Joined: December 29, 2007, 10:41 pm
- Location: Vancouver, BC
Re: Locost 11 R1
That's not a bad spot. I agree, putting it on the body ruins the lines. On the Toj-Jag I'm copying, it's just beside the dash on the drivers side, though I'm sure that spot was chosen due to regulations (within reach of the driver and outside the car).
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
That is what my Son was thinking.
I need to see if belted in I can get to it ?
I need to see if belted in I can get to it ?
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
Running the fuel line. And got a tubing strainer. Works good.
You do not have the required permissions to view the files attached to this post.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
Playing with the fit on the fuel line.
Think I got it ? Needed to clear somethings.
Think I got it ? Needed to clear somethings.
You do not have the required permissions to view the files attached to this post.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
B85
- Posts: 1748
- Joined: January 13, 2008, 9:07 pm
- Location: Glendale AZ
Re: Locost 11 R1
It has started, what a pain.
You do not have the required permissions to view the files attached to this post.
American 7 5.0 T5
Lotus 15 ish?
914/H6
Lotus 15 ish?
914/H6
-
walt
- Posts: 21
- Joined: February 18, 2025, 8:36 pm
- Building: locost roadster
Re: Locost 11 R1
That looks like fun. I am about to jump into that swamp real soon. I thought I had already made the Miata rat's nest a little neater and would fit neatly... didn't happen.
I like the wire labels, where do they come from?
Waltj
I like the wire labels, where do they come from?
Waltj
Who is online
Users browsing this forum: No registered users and 15 guests